CS10 Micron Ceramic Coating
Information
Product Information
10 Micron Ceramic Coating protects non-absorbent surfaces, based on patented technology. 10 Micron Ceramic Coating forms a permanent barrier layer that bonds chemically with the substrate and cures at atmospheric temperature. The surface protected with 10 Micron Ceramic Coating can be cleaned repeatedly without reapplying the product.
PROPERTIES
Restores and seals faded paint and gel coat
Forms a gas barrier which protects against soot and exhaust emissions
High gloss
Excellent adhesion to most substrates
High UV and chemical resistance
Economical
Easy to apply
1 year warranty
If required easily removed with its own specially formulated removal gel
USE
10 Micron Ceramic Coating is particularly suitable for smooth, non-absorbent surfaces, such as one or two component paints (polyurethane or epoxy systems), polyester paints, GRP surfaces, aluminium and stainless-steel surfaces.
Application
PRODUCT APPLICATION
10 Micron Ceramic Coating is supplied ready to use. 10 Micron Ceramic Coating is applied with a West System roller and microfiber applicators. Vessels do not require tenting and applications can be done with the yacht either on the hard standing or berthed in a marina.
TECHNICAL DATA
Appearance: colourless clear liquid
Density: ca. 0.97 g/cm3
Solid Content: 60% – 90%
APPLICATION INSTRUCTIONS
The product should be applied by trained CeraShield applicators only. Test on a small area or apply a test coat before application.
Maintenance
Maintenance
Surfaces coated with 10 Micron Ceramic Coating can be cleaned with normal boat soap in the pH range 3 – 12 range. Strong (mineral) acids or alkalis should be avoided and are also unnecessary as neutral cleaners are sufficient to clean surfaces coated with 10 Micron Ceramic Coating.
REMOVAL
10 Micron Ceramic Coating can easily be removed using our specially formulated removal gel. This gel does not affect paint and gel coats. The gel gently breaks down the ceramic resin in the clear coat leaving the underlying surface ready to be sanded normally prior to a repainting programme. This process is quick and easy.